solder 60/40 1mm

solder 60/40 1mm

 

General Descriptions of solder 60/40 1mm:

This is a tin lead solder wire that made of 60% tin and 40% lead (known as SOLDER Sn60Pb40), and the wire diameter is 1mm, and winded into a solder coil.

Basic information of solder 60/40 1mm

Alloy: Tin & Lead. (Lead containing solder, prohibited to be used for soldering of portable water)

Composition: 60% tin and 40% lead, 60/40

Core: Rosin flux core no clean type at 2.0% or other percentage of flux upon request. Optional we make the solid core without flux.
Brand: XF Solder
Wire diameter: 1mm (19swg)
Gross Weight: 100g/roll, 200g/roll, 250g/roll, 500g/roll, 1000g/roll or others to be customizedly made upon request. Usually for retail purpose small rolls like 100g or 200g are more suitable, for industrial purpose big roll like 500g or 1000g are more reasonable
Reel Size: 5.5cm x 2.8cm/2.2 x 1 inch
Melting point: 365F-374F/185C-190C

 

Feature of 60/40 solder 1mm

1. Good solderability, insulation resistance, No spattering and Non-corrosive.

2. Low melting temeparture and small plastic range

3. Firm and bright solder joint.

4. Moderate wire diameter, suitable for soldering circut board

 

Applications of 60/40 solder 1mm

Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others which requires lower melting temperatures. Also it can be used to solder the plumbings such as joining of copper pipes and fittings.

Contact us if you're looking to buy 60/40 solder 1mm at wholesale price. Email: xfsolder@gmail.com or xfsolder@163.com , Whatsapp/Wechat: 008613450770997